|
1994 Camaro Z28 Road Race Car
Built last year. Only had 6 events last year, and 3 so far this year.
5.7 litre LT1
headers
cat, single chamber Flowmaster muffler through single 3" exhaust
K&N Induction System
ABS
6 spd MN6 with Ripper Shifter
3.42 posi diff
Bilstein shocks with Bilstein Coil-Over Sleeves
Hypercoil 800 lb front springs (with extra 650lb pair)
Stock 114 lb rear springs (cut 1.5 coils)
32mm front sway bar
19mm rear sway bar
Re-inforced rear strut bars
Lower Control Arms Lowering Brackets
Re-inforced Pan-hard Bar
Integrated Sub-Frame Connectors
Front Tower Spreader Brace Bar
13" ZR1 Front Rotors
Wilwood Superlite Front Calipers with Wilwood Thermal-Block pistons, Wilwood Polymatrix pads
12" Stock Rear Rotors with Stock Rear Calipers, Hawk HP+ 90 pads
Motul 600 brake fluid
Synthetic Fluids all around (Motor, Tranny, Diff)
Polyurethane Bushings all Around
All suspension components are NEW
2 OMP seats, 5-pt harness (4-pt for passenger)
SCCA approved rollcage
8 - 9.5x17 ZR1 wheels (4 with Kumho V700 tires, 4 with Firestone SZ50 tires) all tires are 275X40x17
"Should be in SCCA American Sedan, but because of the Headers, it is in ITE"
For Pictures, History of the Racecar visit http://www.pgwatson.net/coyote_racing
Click on the "Building the Car" Link
Posted: 07/09/2003
Reported
SOLD!!
11/25/2003
click here to return to the SCCA Improved Touring E main page.
|
|
